StubValue

A type defining how a stub calculation period amount is calculated. A single floating rate tenor different to that used for the regular part of the calculation periods schedule may be specified, or two floating rate tenors many be specified. If two floating rate tenors are specified then Linear Interpolation (in accordance with the 2000 ISDA Definitions, Section 8.3 Interpolation) is assumed to apply. Alternatively, an actual known stub rate or stub amount may be specified.

Nested view
Tree view

Field	Type	Description	Print form title	FFSM title	Properties	Conditions
Choice begin
Branch1
floatingRate	FloatingRate	The rates to be applied to the initial or final stub may be the linear interpolation of two different rates. While the majority of the time, the rate indices will be the same as that specified in the stream and only the tenor itself will be different, it is possible to specify two different rates. For example, a 2 month stub period may use the linear interpolation of a 1 month and 3 month rate. The different rates would be specified in this component. Note that a maximum of two rates can be specified. If a stub period uses the same floating rate index, including tenor, as the regular calculation periods then this should not be specified again within this component, i.e. the stub calculation period amount component may not need to be specified even if there is an initial or final stub period. If a stub period uses a different floating rate index compared to the regular calculation periods then this should be specified within this component. If specified here, they are likely to have id attributes, allowing them to be referenced from within the cashflows component.	Floating rate.		1-2, mre
Branch2
stubRate	xsd:decimal	An actual rate to apply for the initial or final stub period may have been agreed between the principal parties (in a similar way to how an initial rate may have been agreed for the first regular period). If an actual stub rate has been agreed then it would be included in this component. It will be a per annum rate, expressed as a decimal. A stub rate of 5% would be represented as 0.05.	Agreed stub rate.		1-1, mre, mfr
Branch3
stubAmount	Money	An actual amount to apply for the initial or final stub period may have been agreed between the two parties. If an actual stub amount has been agreed then it would be included in this component.	Agreed stub amount.		1-1, mre
Choice end

Collapse All | Expand All

StubValue

A choice of stub value.

floatingRate(FloatingRate)

The rates to be applied to the initial or final stub may be the linear interpolation of two different rates. While the majority of the time, the rate indices will be the same as that specified in the stream and only the tenor itself will be different, it is possible to specify two different rates. For example, a 2 month stub period may use the linear interpolation of a 1 month and 3 month rate. The different rates would be specified in this component. Note that a maximum of two rates can be specified. If a stub period uses the same floating rate index, including tenor, as the regular calculation periods then this should not be specified again within this component, i.e. the stub calculation period amount component may not need to be specified even if there is an initial or final stub period. If a stub period uses a different floating rate index compared to the regular calculation periods then this should be specified within this component. If specified here, they are likely to have id attributes, allowing them to be referenced from within the cashflows component.

floatingRateIndex(FloatingRateIndex)

	Defines floating rate index.
	Float rate code.

indexTenor(Period)

The ISDA Designated Maturity, i.e. the tenor of the floating rate.

periodMultiplier(integer)

	A time period multiplier, e.g. 1, 2 or 3 etc. A negative value can be used when specifying an offset relative to another date, e.g. -2 days.

period(PeriodEnum)

	A time period, e.g. a day, week, month or year of the stream. If the periodMultiplier value is 0 (zero) then period must contain the value D (day).
	D;W;M;Y;

floatingRateMultiplierSchedule(Schedule)

A rate multiplier or multiplier schedule to apply to the floating rate. A multiplier schedule is expressed as explicit multipliers and dates. In the case of a schedule, the step dates may be subject to adjustment in accordance with any adjustments specified in the calculationPeriodDatesAdjustments. The multiplier can be a positive or negative decimal. This element should only be included if the multiplier is not equal to 1 (one) for the term of the stream.

initialValue(decimal)

	The initial rate or amount, as the case may be. An initial rate of 5% would be represented as 0.05.

step(Step)

	The schedule of step date and value pairs. On each step date the associated step value becomes effective. A list of steps may be ordered in the document by ascending step date. An FpML document containing an unordered list of steps is still regarded as a conformant document.

stepDate(date)

	The date on which the associated stepValue becomes effective. This day may be subject to adjustment in accordance with a business day convention.

stepValue(decimal)

	The rate or amount which becomes effective on the associated stepDate. A rate of 5% would be represented as 0.05.

spreadSchedule(SpreadSchedule)

The ISDA Spread or a Spread schedule expressed as explicit spreads and dates. In the case of a schedule, the step dates may be subject to adjustment in accordance with any adjustments specified in calculationPeriodDatesAdjustments. The spread is a per annum rate, expressed as a decimal. For purposes of determining a calculation period amount, if positive the spread will be added to the floating rate and if negative the spread will be subtracted from the floating rate. A positive 10 basis point (0.1%) spread would be represented as 0.001.

initialValue(decimal)

	The initial rate or amount, as the case may be. An initial rate of 5% would be represented as 0.05.

step(Step)

	The schedule of step date and value pairs. On each step date the associated step value becomes effective. A list of steps may be ordered in the document by ascending step date. An FpML document containing an unordered list of steps is still regarded as a conformant document.

stepDate(date)

	The date on which the associated stepValue becomes effective. This day may be subject to adjustment in accordance with a business day convention.

stepValue(decimal)

	The rate or amount which becomes effective on the associated stepDate. A rate of 5% would be represented as 0.05.

capRateSchedule(StrikeSchedule)

	The cap rate or cap rate schedule, if any, which applies to the floating rate. The cap rate (strike) is only required where the floating rate on a swap stream is capped at a certain strike level. A cap rate schedule is expressed as explicit cap rates and dates and the step dates may be subject to adjustment in accordance with any adjustments specified in calculationPeriodDatesAdjustments. The cap rate is assumed to be exclusive of any spread and is a per annum rate, expressed as a decimal. A cap rate of 5% would be represented as 0.05.
	Cap rate.

initialValue(decimal)

	The initial rate or amount, as the case may be. An initial rate of 5% would be represented as 0.05.

step(Step)

	The schedule of step date and value pairs. On each step date the associated step value becomes effective. A list of steps may be ordered in the document by ascending step date. An FpML document containing an unordered list of steps is still regarded as a conformant document.

stepDate(date)

	The date on which the associated stepValue becomes effective. This day may be subject to adjustment in accordance with a business day convention.

stepValue(decimal)

	The rate or amount which becomes effective on the associated stepDate. A rate of 5% would be represented as 0.05.

floorRateSchedule(StrikeSchedule)

	The floor rate or floor rate schedule, if any, which applies to the floating rate. The floor rate (strike) is only required where the floating rate on a swap stream is floored at a certain strike level. A floor rate schedule is expressed as explicit floor rates and dates and the step dates may be subject to adjustment in accordance with any adjustments specified in calculationPeriodDatesAdjustments. The floor rate is assumed to be exclusive of any spread and is a per annum rate, expressed as a decimal. A floor rate of 5% would be represented as 0.05.
	Floor rate.

initialValue(decimal)

	The initial rate or amount, as the case may be. An initial rate of 5% would be represented as 0.05.

step(Step)

	The schedule of step date and value pairs. On each step date the associated step value becomes effective. A list of steps may be ordered in the document by ascending step date. An FpML document containing an unordered list of steps is still regarded as a conformant document.

stepDate(date)

	The date on which the associated stepValue becomes effective. This day may be subject to adjustment in accordance with a business day convention.

stepValue(decimal)

	The rate or amount which becomes effective on the associated stepDate. A rate of 5% would be represented as 0.05.

stubRate(decimal)

	An actual rate to apply for the initial or final stub period may have been agreed between the principal parties (in a similar way to how an initial rate may have been agreed for the first regular period). If an actual stub rate has been agreed then it would be included in this component. It will be a per annum rate, expressed as a decimal. A stub rate of 5% would be represented as 0.05.

stubAmount(Money)

	An actual amount to apply for the initial or final stub period may have been agreed between the two parties. If an actual stub amount has been agreed then it would be included in this component.

currency(Currency)

	The currency in which an amount is denominated.
	Code of currency of denomination.

amount(decimal)

	The monetary quantity in currency units. For the purposes of reporting to the repository, an amount is specified with 7 decimal places. For example, 350.1234567. The value of 350.45 would be represented as 350.4500000.